|
Microprocessor-based
control system provides all the functionality of the Model 2000
Automatic Transfer Control plus the ability to monitor key power
data.
|
|||
 |
Designed as a performance upgrade to the Model 2000, the Model 2000 PLUS controls all the operational functions of the automatic transfer switch including optional accessories | ||
|
Allows remote monitoring using industry-standard open-architecture communications protocol through a Modbus RTU communications network or through an Ethernet network (with converter). Data can be viewed using customer-provided software or Russelectric Windows®-based SCADA | ||
|
Samples voltage and current simultaneously for all phases to ensure high accuracy under conditions of low power factor or large waveform distortions (harmonics) | ||
|
Capable of operating at 45 to 66 Hz nominal frequencies, it can be used in single-phase or 3-phase, 3- and 4-wire circuits and is accurate to 1% without the use of PTs | ||
|
Reports all key power data-- metered and computed values: | ||
 |
Current, per phase RMS and neutral | ||
|
% Current Unbalanced | ||
|
Voltage, phase-to-phase and phase-to-neutral | ||
|
% Voltage Unbalanced | ||
|
Real Power (KW), per phase and 3-phase total | ||
|
Apparent Power (KVA), per phase and 3-phase total | ||
|
Reactive power (KVAR), per phase and 3-phase total | ||
|
Power Factor, per phase and 3-phase total | ||
|
Accumulated
Energy (KWH, KVAH, and KVARH) |
||
|
Transmits power data by means of high-speed serial communications AND displays data on-site through scroll-down menus accessed through keypad | ||
|
With Web Server communications option, control can be accessed via the Internet for unlimited remote monitoring flexibility. With only a laptop computer and Internet access, a user can view all power data and diagnostic information. | ||
|
Logs up to 99 events and reports them in English language text | ||
Model 2000 PLUS
